GW Instek LCR-8000G Series - Command Syntax; Command Syntax Command Syntax

LCR-8000G Series User Manual
112
Command Syntax
Compatible
standard
 IEEE488.2, 1992 (fully compatible)
 SCPI, 1994 (partially compatible)
Command format
trig:del:mod <NR1>LF
1 2 3 4
1: command header
2: single space
3: parameter
4: message terminator
Parameter
Type
Description
Example
<Boolean>
boolean logic
0, 1
<NR1>
integers
0, 1, 2, 3
<NR2>
decimal numbers
0.1, 3.14, 8.5
<NR3>
floating point
4.5e-1, 8.25e+1
<disc>
discrete data
on, off, max
Message
terminator
Terminates a command line. Note that the LCR-
8000G accepts only LF (line feed) as the terminator.
LF
line feed code
Note
 Commands introduced here are described in
abbreviated style (same functionality)
 Commands are non-case sensitive.
w ww . . co m
information@itm.com1.800.561.8187