GW Instek LCR-8000G Series - Vertical Scale Setting; Vertical Scale Set Vertical Axis (Manual + Absolute)

GRAPH MODE
95
Vertical Scale Setting
Set vertical axis (Manual + Absolute)
Background
The Y (vertical) axis configuration is available for:
 Manual or Automatic fit: Selects whether the
vertical range is manually set or automatically
adjusted as the graph is plotted.
 Absolute or Percentage: Selects how the vertical
range is defined, as absolute values (minimum
and maximum) or percentage of the nominal
(center) value.
Panel operation
1. Press F2 to select Abs.
Abs %
F 2
2. Press F3 to select Manual Fit.
Manual Fit
F 3
3. The maximum (Hi) and minimum (Lo) level of
the vertical axis appears.
Step Size:
Cs Hi
Cs Lo
:
:
2 4 8
1
3.5626mF
5.8240mF
Set Hi level
4. Press the Up/Down key to move the
cursor to Hi level.
Cs Hi: 5.8240mF
5. Use the numerical keys to enter the Hi level.
Range
According to each measurement item
(see page38).
1.2mΩ
m
Ω
Enter
w ww . . co m
information@itm.com1.800.561.8187