GW Instek LCR-8000G Series - Page 96

LCR-8000G Series User Manual
96
1.5kH
Enter
H
k
Backspace
All clear
Clear
If a wrong unit is entered, the value is cancelled.
Unit Mismatched
If a value outside of the range is entered, the
closest available value is automatically selected.
Nearest Available
If the entered Lo level is higher than the Hi
level, the two values are swapped.
Hi and Lo Swapped
Set Lo level
6. Press the Up/Down key to move the
cursor to Lo level and repeat the
same step.
Cs Lo: 3.5626mF
w ww . . co m
information@itm.com1.800.561.8187