GW Instek LCR-8000G Series - Set Measurement Range to Auto

LCR-8000G Series User Manual
52
Set measurement range to Auto
Background
The measurement range is an internal parameter
defining the search range for each measurement
item. Make sure the Auto setting is always
selected, to obtain the best measurement accuracy.
The active range appears at the top left corner of
the display.
MEASUREMENT MODE
0.01234
0.2179
nS
D
*7
–
Panel operation
1. Press the Left/Right key
repeatedly to move the cursor to
Range position.
Speed Slow
Range Auto
2. If the range is NOT set to Auto,
press the Up/Down key
repeatedly to set it back to Auto.
Speed Slow
Range 5
Speed Slow
Range Auto
w ww . . co m
information@itm.com1.800.561.8187