GW Instek LCR-8000G Series - Interface Configuration; Interface Configure RS-232 C Interface; Configuration

REMOTE CONTROL
109
Interface Configuration
Configure RS-232C interface
RS-232C
configuration
Connector
DB-9, Male
Baud rate
9600
Parity
None
Data bit
8
Stop bit
1
Connect the RS-232C cable to
the rear panel port: DB-9 male
connector.
RS232
Pin assignment
1 2 3 4 5
6 7 8 9
2: RxD (Receive data)
3: TxD (Transmit data)
5: GND
7: RTS (Request to send)
8: CTS (Clear to send)
1, 4, 6, 9: No connection
PC connection
Use the Null Modem connection as in the below
diagram.
LCR-8101G PC
TxD
RxD
GND
Pin2
Pin3
Pin5
TxD
RxD
GND
Pin2
Pin3
Pin5
CTS
RTSPin7
Pin8 CTS
RTS Pin7
Pin8
w ww . . co m
information@itm.com1.800.561.8187