GW Instek LCR-8000G Series - Running Measurement; Run Measurement Select Single Measurement

LCR-8000G Series User Manual
56
Running Measurement
Select Single measurement
Background
The data capture can be manually controlled
(Single) or automatically updated (Repetitive).
In single measurement, the measurement is
activated by pressing the Trigger key.
In repetitive measurement, the measurement is
automatically done and the display is updated
according to the speed (timing) setting.
Panel operation
1. Press the Sing/Rep key repeatedly
until the “Single Shot Mode”
message appears on the display.
Sing/Rep
Single Shot Mode
2. The measurement update indicator (*) does not
appears at the top left corner of the display.
MEASUREMENT MODE
nS
D
7
3. To capture measurement data, press
the Trigger key. The measurement
update indicator (*) blinks and the
measurement result is updated on
the display.

MEASUREMENT MODE
0.01234
0.2179
nS
D
*7
–
w ww . . co m
information@itm.com1.800.561.8187