GW Instek LCR-8000G Series - Configure the Average

LCR-8000G Series User Manual
74
Configure the Average
Background
The Average function sets the number of samples
used, which are then averaged as the final output.
The number of samples varies from 1 to 256.
Panel operation
1. Press the Menu key, then F5
(System). The system configuration
appears.
Menu
F 5
Precision LCR Meter LCR-8101G
5
:
Frequency
Software version 2.04 Apr 25 2009
RS-232
Graph mode
GPIB
Line frequency
Beep
GPIB address
:
:
OFF
50Hz
1MHz
Average : 10
2. Press the Up/Down key and move
the cursor to Average.
Average : 10
3. Use the number pad to enter the number of
samples to be averaged. A maximum of 256
samples can be selected for averaging.
Average: 10

w ww . . co m
information@itm.com1.800.561.8187