GW Instek LCR-8000G Series - Raph Mode; Graph Mode

LCR-8000G Series User Manual
88
GRAPH MODE
The graph function shows the component
characteristics in visual manner. Voltage and
Frequency sweep are selectable for the horizontal
scale. When the graph gets out of the vertical
range, the LCR-8000G can automatically adjust
the scale. Marker operation is available for
detailed observation.
Item selection
Enter graph mode ........................................... 89
Select measurement item ............................... 90
Horizontal scale
setting
Set horizontal axis (Voltage) ........................... 91
Set horizontal axis (Frequency) ....................... 93
Vertical scale
setting
Set vertical axis (Manual + Absolute) .............. 95
Set vertical axis (Manual + Percentage) .......... 97
Set vertical axis (Auto + Absolute) .................. 99
Set vertical axis (Auto + Percentage) .............. 100
Speed/Step
Setting
Select measurement speed (capture timing) .. 102
Select step size .............................................. 103
Running Graph
Measurement
Run measurement ......................................... 104
Adjust vertical scale ....................................... 106
Observe Graph Data ...................................... 107
w ww . . co m
information@itm.com1.800.561.8187