GW Instek LCR-8000G Series - Multi-Step Test Configuration; Multi-Step Overview

PASS-FAIL MODE
71
Multi-Step Test Configuration
Overview
Background
The multi-step function can configure and run
multiple measurement steps. Maximum 64
programs, 30 steps each, can be programmed and
stored in the instrument.
Limit type
Only the absolute limit
testing is available. For
percentage limit test, use
the single mode (page61).
Lo
Limit
Hi
Limit
Pass
Test item
CS
Series capacitance
B
Susceptance
CP
Parallel
capacitance
G
Conductance
LS
Series inductance
Z
Impedance
LP
Parallel inductance
Y
Admittance
RS
Series resistance
RDC
DC Resistance
RP
Parallel resistance
θ
Angle
X
Reactance
For detailed description of each item, see page38.
w ww . . co m
information@itm.com1.800.561.8187