GW Instek LCR-8000G Series - Page 31

GETTING STARTED
31
8. Enter Run
menu
Press F6 (Run). The Run menu opens.
Page81
9. Set Single or
Repetitive
Press the Sing/Rep key to select Single
(manual trigger) or Repetitive (auto
trigger).
Page81
10. Start running
If the test has not started yet, press F1
(Start) or Trig key. Press F6 (Set) to go
back to the setup menu.
Page81
File operation:
new program
Press F5 (File), then F4 (New). Press the
Left/Right keys to move the cursor and
press the Down key to select character. To
confirm the file name, press the Enter key.
A new file appears.
To delete a character, press the Up key.
To quit, press the Clear key.
Page75
File operation:
load
Press F5 (File), then F1 (Load). Use the
arrow keys to select the program and
press F1 (Load).
Page86
File operation:
delete
Press F5 (File), then F2 (Delete). Use the
arrow keys to select the program and
press F5 (Del).
Page87
File operation:
save as
Press F5 (File), then F3 (Save as). Press the
Left/Right keys to move the cursor and
press the Down key to select character. To
confirm the file name, press the Enter key.
A new file appears.
To delete a character, press the Up key.
To quit, press the Clear key.
Page84
w ww . . co m
information@itm.com1.800.561.8187