Installation Manual
H3C S3600 Series Ethernet Switches Chapter 1 Product Overview
1-33
III. Attributes of the 10Base-T/100Base-TX Ethernet ports
Table 1-13 Attributes of the 10Base-T/100Base-TX Ethernet ports
Attribute Description
Connector RJ-45
Number of ports 24
Rate
z 10/100 Mbps, half duplex/full duplex
z MDI/MDI-X auto-sensing
z PoE
Standard
z IEEE 802.3u
z IEEE 802.3af
Transmission distance over
the selected medium
100 m (328.08 ft) over the category-5 unshielded
twisted pair (UTP) cable
IV. Attributes of the 1000Base-X SFP ports
The S3600-28P-PWR-SI/S3600-28P-PWR-EI provides four 1000Base-X SFP ports
numbered 25 to 28 on the front panel.
Note:
SFP modules do not support PoE.
SFP modules allow for great flexibility because they are hot swappable and user
configurable.
Table 1-5 lists the available SFP modules.
Note:
z The types of 1000Base-X SFP modules may be subject to changes without notice.
Consult H3C marketing personnel or technical support personnel to obtain the latest
information about SFP modules.
z For specifications of SFP modules, refer to H3C Low End Series Ethernet Switches
Pluggable Modules Manual.
V. Console port
The S3600-28P-PWR-SI/S3600-28P-PWR-EI provides one EIA/TIA-232 compliant
Console port for local or remote switch configuration. For the attributes, see
Table 1-4.
To Next Page
Loading...
