H3C S3600 Series - Page 70

Installation Manual
H3C S3600 Series Ethernet Switches Chapter 4 Starting up the Switch at the Initial Boot
4-2
Step 1: Start the PC and select [Start/Programs/Accessories/Communications/HyperTe
rminal].
The HyperTerminal window displays the Connection Description dialog box, as shown
in
Figure 4-2.
Figure 4-2 Setting up a new connection
Step 2: Enter the name of the new connection in the Name field and click <OK>. The
dialog box, as shown in Figure 4-3 displays. Select the serial port to be used from the
Connect Using dropdown menu. The serial port must be the same port connected by
the console cable.
Figure 4-3 Setting the connection port