H3C S5120-SI Series

About This Manual
Organization
H3C S5120-SI Series Switches Configuration Manual – Release 1101 is organized as follows:
Chapter Contents
00-1 Product Overview
Introduces the characteristics and implementations of the
Ethernet switch.
01-Login
Introduces the command hierarchy, command view and CLI
features of the Ethernet switch.
02-Ethernet Interface Introduces Ethernet port configuration.
03-Loopback Interface and Null
Interface
Introduces loopback interface and null interface configuration.
04-Link Aggregation Introduces link aggregation and the related configuration.
05-Port Isolation Introduces port isolation and the related configuration.
06-Port Mirroring Introduces local port mirroring and the related configuration.
07-LLDP Introduces LLDP and the related configuration.
08-VLAN Introduces VLAN fundamental and the related configuration.
09-MSTP Introduces STP and the related configuration.
10-IP Addressing Introduces IP address configuration.
11-IP Performance
Optimization
Introduces IP performance fundamental and the related
configuration.
12-ARP Introduces ARP and the related configuration.
13-DHCP
Introduces DHCP relay, DHCP-Snooping, DHCP client, BOOTP
client and the related configuration.
14-FTP and TFTP
Introduces basic configuration for FTP and TFTP, and the
applications.
15-IP Routing Basics
Configuration
Introduces the ip routing and routing table.
16-Static Routing Introduces the static route configuration.
17-Mulitcast
Introduces the configuration of IGMP snooping and multicast
VLAN.
18-QoS
Introduces the configuration of QoS Policy, Priority Mapping, Line
Rate, SP, WRR, and SP+WRR Queuing.
19-802.1X Introduces the configuration of 802.1X.
20-AAA Introduces AAA, RADIUS and the related configuration.
21-PKI Introduces the configuration of PKI.
22-SSL Introduces the configuration of SSL.
23-SSH2.0
Introduces the configuration of SSH Server, SSH Client, SFTP
Server, SFTP Client.
24-Public Key
Introduces the configuration of local asymmetric key pair and
public key of a peer.