Page 29
Time & Date
This menu allows the system time and date to be set by the user. To change the system time or date (hours,
minutes, seconds, day, month and year), press the ENTER key, enter the new time and date and press the
ENTER key again.
In order to change the system date format, press the ENTER key, select new date format from the following
day, month and year options: DD-MM-YY, MM-DD-YY, YY-MM-DD and press the ENTER key again.
When the time is changed, it is possible for the BioTector to automatically start up if the
new time is after the startup time for a scheduled task, for example the startup time for
a manual sample sequence in Manual Program menu.
To Next Page
Loading...
Need help?
General
