Hach CM130 - Page 32

112 pages

To Next Page

To Previous Page

5. Insert the cable through the cable opening in the backplate. It is recommended to leave at least

60 cm (2 ft) of extra cable length behind the mounting surface for future changes to the

installation.

30 English

Main Page

Default Chapter3
- Table of Contents3
Specifications5
General Information6
- Safety Information6
  - Use of Hazard Information7
  - Precautionary Labels7
- Certification8
- Indications for Use8
- Product Overview9
  - Remote Indicator Lights and Sounds13
- Product Components14
- Items to Collect16
Installation17
- Look at the Installation Overview Video17
- Installation Guidelines17
- Complete the Equipment Installation Qualification Document19
- Analyzer Mounting20
- Plumb the Analyzer22
- Remote Indicator Installation27
- Analyzer Electrical Installation39
Configuration47
- Set the Time Zone47
- Set the Date and Time47
- Configure the Network Settings48
Install the Colorimeter and Reagents49
Install the Door54
User Interface and Navigation55
- Keypad Description55
- Display Description56
Operation57
- Set to Measurement Mode57
- Set to Idle Mode57
- Show the Analyzer Information57
- Show the Measurement and Event History58
Maintenance59
- Maintenance Schedule59
- Monthly Maintenance60
- Periodic Maintenance61
- Replace the Remote Indicator Battery62
- Install a Software Update63
- Calibration63
- Remove Power63
- Prepare for Storage64
- Prepare for Shipping66
- Clean the Instrument67
- Clean Spills67
Troubleshooting67
- Remote Indicator Lights and Sounds67
- Alerts and Alarms69
- Interferences74
Consumables and Replacement Parts75
Appendix A: Screens-Install the Colorimeter76
Appendix B: Screens-Install Reagents78
Appendix C: Screens-Data Export87
Appendix D: Screens-Prime Reagents89
Appendix E: Screens-Flush Colorimeter91
Appendix F: Screens-Performance Check93
Appendix G: Screens-Monthly Maintenance97
Appendix H: Symbols Glossary108

Hach CM130 - Page 32

Table of Contents

Related product manuals