Product overview
D A N G E R
Chemical or biological hazards. If this instrument is used to monitor a treatment process and/or dialysis
feed water for which there are regulatory limits and monitoring requirements related to public health,
public safety, food or beverage manufacture or processing, it is the responsibility of the user of this
instrument to know and abide by any applicable regulation and to have sufficient and appropriate
mechanisms in place for compliance with applicable regulations in the event of malfunction of the
instrument.
N O T I C E
It is expected that the users of this device follow applicable AAMI standards for water treatment equipment for
hemodialysis and related therapies identified in ANSI/AAMI 26722:2014 for water treatment equipment
requirements for dialysis.
The CM130 is an ultra-low chlorine analyzer that measures the total chlorine concentration in
dialysate water used for dialysis treatment. A measurement is typically completed in 5-minute
intervals.
Figure 1 shows an overview of the analyzer exterior. Figure 2 shows an overview of the analyzer
interior.
The remote indicator for the CM130 identifies the chlorine status and the analyzer status in the
treatment room with sound and colored lights.
Figure 3 shows an overview of the remote indicator exterior. Table 4 on page 11 gives descriptions
of the remote indicator lights and sounds.
English 7
To Next Page
Loading...
Need help?
General
