To Next Page

To Previous Page

Figure 19 Analyzer overview—components

1 Pump clamp 6 Metal fitting

2 Reagent delivery module 7 Hole for the colorimeter tube

3 Reagent delivery connector 8 Stir motor

4 Mating connector for the colorimeter connector 9 Funnel tube

5 Cable clamp for the colorimeter cable

Install the door

Install the door back on the analyzer door hinges. Refer to Figure 13 on page 37. The door must be

installed and closed when the analyzer is in operation.

English

Default Chapter3
- Table of Contents3
Specifications5
General Information6
- Safety Information6
  - Use of Hazard Information7
  - Precautionary Labels7
- Certification8
- Indications for Use8
- Product Overview9
  - Remote Indicator Lights and Sounds13
- Product Components14
- Items to Collect16
Installation17
- Look at the Installation Overview Video17
- Installation Guidelines17
- Complete the Equipment Installation Qualification Document19
- Analyzer Mounting20
- Plumb the Analyzer22
- Remote Indicator Installation27
- Analyzer Electrical Installation39
Configuration47
- Set the Time Zone47
- Set the Date and Time47
- Configure the Network Settings48
Install the Colorimeter and Reagents49
Install the Door54
User Interface and Navigation55
- Keypad Description55
- Display Description56
Operation57
- Set to Measurement Mode57
- Set to Idle Mode57
- Show the Analyzer Information57
- Show the Measurement and Event History58
Maintenance59
- Maintenance Schedule59
- Monthly Maintenance60
- Periodic Maintenance61
- Replace the Remote Indicator Battery62
- Install a Software Update63
- Calibration63
- Remove Power63
- Prepare for Storage64
- Prepare for Shipping66
- Clean the Instrument67
- Clean Spills67
Troubleshooting67
- Remote Indicator Lights and Sounds67
- Alerts and Alarms69
- Interferences74
Consumables and Replacement Parts75
Appendix A: Screens-Install the Colorimeter76
Appendix B: Screens-Install Reagents78
Appendix C: Screens-Data Export87
Appendix D: Screens-Prime Reagents89
Appendix E: Screens-Flush Colorimeter91
Appendix F: Screens-Performance Check93
Appendix G: Screens-Monthly Maintenance97
Appendix H: Symbols Glossary108

Brand	Hach
Model	CM130
Category	Measuring Instruments
Language	English

Hach CM130 User Manual

Table of Contents

Questions and Answers:

Hach CM130 Specifications

Related product manuals