EasyManua.ls Logo

Haier AB072MRERA - Page 548

Haier AB072MRERA
651 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
540
Clean the machine (Cleaning ways are approximately same, taking AS182MNERA indoor machine as
example).
Turn off the air conditioner before cleaning. Do not touch the machine if the hands are wet. Neither hot water
nor solvent should be used in cleaning.
Replacement of Air Purifying Filter
1. Open the inlet grille
Prop up the inlet grille by using a small device named grille-support which
located in the right side of the indoor unit.
2. Detach the standard air lter
Slide the knob slightly upward to release the lter, then withdraw it.
3. Attach Air Purifying Filter
Put air purifying lter appliances into the right and left lter frames.
ATTENTION:
The white side of the photo catalyst air purifying lter face outside, and the black side face the unit The green
side of the bacteria-killing medium air purifying lter face outside, and the white side face the unit.
The photo catalyst air purifying lter will be polarized in xed time. In normal family, it will be polarized every 6
months.
The bacteria-killing medium air purifying lter will be used for a long time, no need for replacement. But in the
period of using them, you should remove the dust frequently by using vacuum cleaner or aping them lightly,
otherwise, its performance will be affected.
Please keep the bacteria-killing medium air purifying lter in the cool and dry conditions avoid long time
directly sunshine when you stop using it, or its ability of sterilization will be reduced.
4. Attach the standard air lter
(Necessary installation)
5. Close the inlet grille
Close the Grille surely
NOTE:

Table of Contents

Related product manuals