553
HRV
22.4 Features
1. Automatic ventilation mode changeover: Auto/Heat recovery/ Bypass
2. Fan speed changeover by indoor wired controller
3. Filter icon display when the lter needs to be cleaned
4. Standard HRV wired controller
5. Timer function
6. HRV can be used individually without outdoor unit
7. Auto restart function
Energy saving
Heat recovery mode: Reduce about 
20% reduction of heating/cooling load
HRV unit  will  reclaim  the  energy  in  cooling/heating  operation  of  air 
conditioner.  HRV will  reduce  the cooling/heating load and  increase  the 
cooling/heating efciency.
Auto mode:
Reduce about 8% reduction of heating/
cooling load
Properly select the different operation mode  can  improve  the  efficiency. 
When the  cooling operation  is  required  in  winter,  you'd better  use the 
bypass mode, refer to the below table:
Operation Ventilation
Higher efciency mode
Difference between indoor 
temp. and outdoor temp.
Cooling
Indoor temp.>outdoor temp.
Indoor temp.>outdoor temp.
Bypass mode 
Heat recovery mode
Heating
Indoor temp.>outdoor temp.
Indoor temp.>outdoor temp
Heat recovery mode
Bypass mode
By rerunning mode: Reduce about 2% 
reduction of heating/ cooling load
When the unit is in the rerunning mode, HRV will be at standby state. After 
finishing pre-running  mode,  HRV will turn  into normal  mode. Thus  the 
cooling/heating load will be reduced and reach the admired temp. quickly.
D
D
D
O
O
O
I
I
I
S
S
S
H
H
H