62
Connecting
1. Connecting circular terminals
The connecting method of circular terminal is shown in the Fig. Take off the screw, connect it to the terminal tier
after heading it through the ring at the end of the lead and then tighten it.
2.Connecting straight terminals
The connection methods for the circular terminals are shown as follows: loosen the screw before putting the line
terminal into the terminal tier, tighten the screw and conrm it has been clamped by pulling the line gently.
3.Pressing connecting line
After connecting line is completed, press the connecting line with clips which should press on the protective
sleeve of the connecting line.
Connecting
circular
terminals
Correct
pressing
Wrong
pressing
Terminal tier
Pressing clip
To Next Page
Loading...
