Hammer K3 winner - Transport with a Crane; Transport with a Fork Lift Truck

28
29
!
!
Panel Saw
K3 basic/K3 winner
Transport, packaging and storage
6.2.3 Transport with a crane
Fig. 22: Transport with a crane
Only use belts or chains to transport the machine.
Attention! Risk of material damage! The machine must not be lifted by the work table, sliding table or
base!
Fig. 23: Transport with a crane
Thread the belts or chains through the cut-out holes in the
machine frame.
! Machine frame
6.2.4 Transport with a fork lift truck
Fig. 24: Transport with a fork lift truck
K3 basic:
Move the forks so that one fork fits into the machine
frame cut-out and the other fork into the transport device.
K3 winner:
Move the truck‘s forks so that they fit into the holes in the
machine frame.
! Machine frame