Chapter 8 Page 199
6. Click OK.
7. Disable any other application that opens the IR port.
Configuring HotSync Manager for
infrared communication
Next you need to go to the HotSync Manager and configure it for
infrared communication. In Windows 98 and Me, you need to specify
the simulated port used for infrared communication. In Windows
2000, you simply need to activate the infrared menu item.
To configure HotSync Manager for infrared communication with
Windows 98 and Me:
1. Click the HotSync Manager icon in the Windows system tray.
2. Make sure Local Serial is checked on the menu.
3. Choose Setup.
4. Click the Local tab.
5. In the Serial Port list, select the simulated port used for infrared
communication. See the previous section, “To check the ports used
for infrared communication with Windows 98 and Me:” for
instructions on identifying the simulated port.
To Next Page
Loading...
