Hantek 6022BE - Appendix A: Specifications

Hantek 6022BE
Appendix A: Specifications
Specifications Table:
Input
Real Real-time sampling:48MS/s
Channels 2 Channels
Bandwidth
20MHz (-3dB)
Vertical resolution 8 bits/channel
Gain range 10mV ~ 5V/div @ x1 probe(10mV, 20mV, 50mV, 100mV,
200mV, 500mV, 1V, 2V, 5V/div1,2,5 sequence)
100mV ~ 50V/div @ x10 probe
1V ~ 500V/div @ x100 probe
10V ~ 5KV/div @ x1000 probe
Range 8 divisions
Offset level +/-4 divisions
Coupling DC
Offset increments 0.02 div
Impedance 1M ohm
DC accuracy +/-3%
Input protection 35Vpk (DC + peak AC < 10 kHz, without external
attenuation)
Display Mode Y-T, X-Y
Timebase
Timebase range 4ns/div ~ 1h/div(4ns, 10ns, 20ns, 40ns, 100ns, 200ns,
400ns, 1us, 2us, 4us, 10us, 20us, 40us, 100us, 200us,
400us, 1ms, 2ms, 4ms, 10ms, 20ms, 40ms, 100ms,
200ms, 400ms, 1s,2s, 4s,
10s,20s,40s,10m,20m,40m,1h /div 1-2-4 sequence)
Range 10 divisions
Buffer Size
Max. 1M samples/channel
Trigger
Type Edge trigger
Mode Auto, Normal and Single
Autoset Yes
Range 10 divisions
Trigger level +/-4 divisions
Settabillity 0.02 div increments
61
The User’s Manual