Hantek 6022BE
2.
Format: leads the setting of the horizontal format parameters
The time base ranges of the oscilloscope is listed as follows. The horizontal
scan speed is from 4ns/div to 1hour/div.
In the “Format” menu of the “Horizontal” menu, select the display mode to Y-
T, X-Y .
Set Trigger System
Click “Trigger” in main menu
The trigger determines when the oscilloscope starts to acquire data and
display a waveform. When a trigger is set up properly, it can convert unstable
displays or blank screens into meaningful waveforms.
If the oscilloscope wants to acquire a waveform, it collects enough data so
that it can draw the waveform to the left of the trigger point. The oscilloscope
continues to acquire data while waiting for the trigger condition to occur. The
oscilloscope continues to acquire enough data so that it can draw the
waveform to the right of the trigger point after it detects a trigger,.
The Edge trigger determines whether the oscilloscope finds the trigger point
35
The User’s Manual
To Next Page
Loading...
