Hantek 6022BE - Appendix B: General Maintenance

Hantek 6022BE
Math
Measurements Vp-p, Vmax, Vmin, Vmean, Vrms, Vamp, Vtop, Vbase,
Vmid,positive overshoot, negative overshoot, cycle mean,
cycle RMS, period, frequency, positive pulse width,
negative pulse width, rise time (10%~90%), fall time
(10%~90%), positive duty cycle, negative duty cycle
Math Addition, Subtraction, Multiplication, Division
FFT Rectangular, Hanning, Hamming, Blackman Window
Physical
Interface USB2.0 (USB1.1 compatible)
Power No external power source required.
Bus-powered from USB
Dimensions 187 x100 x 33(mm)
Appendix B: General Maintenance
General Care
Do not store or leave the oscilloscope where the device will be exposed to
direct sunlight for long periods of time.
Caution
To avoid damages to the device or probes, do not expose them to sprays,
liquids or solvents.
Cleaning
Inspect the device and probes as often as operating conditions require.
Make sure the device disconnect form all power sources.
To clean the exterior surface, perform the following steps:
1.
Remove loose dust on the outside of the oscilloscope and probes with
a lint-free cloth. Use care to avoid scratching the clear glass display
filter.
2.
Use a soft cloth dampened with water to clean the device.
Caution
To avoid damages to the surface of the device or probes not use any
62
The User’s Manual