Hantek 6022BE - The Utility Function

Hantek 6022BE
The Utility Function
Click the “Menu -> Utility” to get into the “Utility” menu.
The “Utility” Functions:
 Calibrate
 Factory Setup
 Interpolation
Factory Setup
Click “Factory Setup” in “Utility” menu to load default setups
When you click the Factory Setup in Utility menu, the oscilloscope displays
the CH1 and CH2 waveforms and removes all other waveforms.
The oscilloscope set up for normal operation when it is shipped from the
factory and can be recalled at anytime by user.
The Factory Setup function does not reset Date and time.
43
The User’s Manual