Programmable Temperature & Humidity Controller
14
※ If the button is disabled or cannot be set, a beep alarm sounds and the execution is denied
2. Button operation
Run button Runs corresponding operation immediately.
Select button Select one of the displayed items
Input box
Displays ansets numbers and characters.
Press it to display the numeric or character input panel.
Displays parameter names and setting ranges.
Displays setting values.
Registers setting values.
Remove the last digit of setting value.
Remove the entire setting value.
Cancel setting and hide input panel.
3. How to control numeric input panel
Fig. 6) Numeric input panel
※ If the input exceeds the setting range, a beep alarm sounds and the execution is denied
هﺮﮐ ﮓﻧﺎﯿﻧﺎﻫ تﻻﻮﺼﺤﻣ یرﺎﺼﺤﻧا هﺪﻨﯾﺎ ناﻮﯿﺳ ﺖﮐﴍ
To Next Page
Loading...
