Programmable Temperature & Humidity Controller
48
System setting
▶ Access to system setting
- Default password is “0”.
- To restrict access of users, press System icon to enter System setting screen and change
user password. (For more details, refer to page. 74)
Caution: System setting is a pre-installed basic setting condition so you need special
attention when you change them. There is no need for operators to set system unless
special case, strict care is required when changing System settings.
Danger
Fig. 59) Access to system setting
هﺮﮐ ﮓﻧﺎﯿﻧﺎﻫ تﻻﻮﺼﺤﻣ یرﺎﺼﺤﻧا هﺪﻨﯾﺎ ناﻮﯿﺳ ﺖﮐﴍ
To Next Page
Loading...
Need help?
General
