61
Before starting Installation
Operation
Screen block
diagram
Function setting Program System setting Specifications
6 Points for temperature, 2 points for humidity are available for ON/OFF signal
1. L.SV
- Set lower limit of ON/OFF signal operation.
2. M.SV
- Set median of ON/OFF signal operation.
3. H.SV
- Set upper limit of ON/OFF signal operation.
4. LU
- Set lower limit offset of ON/OFF signal operation.
5. HD
- Set upper limit offset of ON/OFF signal operation.
▶ Temperature/Humidity setting
5. ON/OFF signal
Parameter Setting range Default
L.SV
Temperature EU (0 ~ 100)
0.0
M.SV 0.0
H.SV 0.0
LU
Temperature EUS (0 ~ 100)
0.0
HD 0.0
Parameter Setting range Default
L.SV
Humidity EU (0 ~ 100)
0.0
M.SV 0.0
H.SV 0.0
LU
Humidity EUS (0 ~ 100)
0.0
HD 0.0
[Temperature ON/OFF signal]
Humidity ON/OFF signal]
Fig. 88) ON/OFF – Temperature Fig. 89) ON/OFF – Humidity
هﺮﮐ ﮓﻧﺎﯿﻧﺎﻫ تﻻﻮﺼﺤﻣ یرﺎﺼﺤﻧا هﺪﻨﯾﺎ ناﻮﯿﺳ ﺖﮐﴍ
To Next Page
Loading...
Need help?
General
