39
Before starting Installation
Operation
Screen block
diagram
Function setting Program System setting Specifications
Program control is the process of control measurements with a change in the set value according to the
time. This is particularly widely used in environmental testing equipment such as thermostatic humidity
chamber, electric furnace, etc. On this screen, you can set the parameters related to program controls.
1. Pattern setting
PROGRAM
①
②
③
④
No. Description
1 Change the pattern No. (Pattern 1 - 100)
2 Move by 5 segment. If a segment is selected, it is changed to Insert/Delete button.
No. Description
3 Pattern graph is displayed.
4 Select a segment. Selected segment can be inserted/deleted.
Fig. 45) Pattern setting
Fig. 43) Main menu Fig. 44) Program menu
Fig. 46) Pattern insertion/deletion
هﺮﮐ ﮓﻧﺎﯿﻧﺎﻫ تﻻﻮﺼﺤﻣ یرﺎﺼﺤﻧا هﺪﻨﯾﺎ ناﻮﯿﺳ ﺖﮐﴍ
To Next Page
Loading...
Need help?
General
