Programmable Temperature & Humidity Controller
38
Displays history of up to 40 errors.
▶ Error
Error message Description
[Temperature] sensor
disconnection
Temperature sensor disconnected
[temperature] ADC error Error in the temperature ADC converter
[temperature] calibration error Error in the temperature calibration
[temperature] input connection
error
error in temperature input connection
[Humidity] sensor disconnection The humidity sensor is disconnected
[Humidity] ADC error An error has occurred in the humidity ADC converter
[Humidity] calibration error Error in humidity calibration
[Humidity] input connection error Error in humidity input connection
I/O[nn] connection error No connection in I/O[nn]
D.I nn occur contact input (D.I nn) occurred
(D.I nn) cancel contact input (D.I nn) cancelled
P. alarm nn occur Pattern alarm (P. alarm nn) occurred
P. alarm nn cancellation Pattern alarm (P. alarm nn) has been canceled
S alarm nn occurring System alarm (S. alarm nn) occurred
S. alarm nn cancellation System alarm (S. alarm nn) has been canceled
No. Description
1 Go to other pages. History of up to 40 items can be checked.
2 Initialize error history. (enabled when it is not being saved)
3 Save error history to SD card. (enabled when it is not being saved)
Fig. 42) Error history
③②
①
هﺮﮐ ﮓﻧﺎﯿﻧﺎﻫ تﻻﻮﺼﺤﻣ یرﺎﺼﺤﻧا هﺪﻨﯾﺎ ناﻮﯿﺳ ﺖﮐﴍ
To Next Page
Loading...
Need help?
General
