Programmable Temperature & Humidity Controller
40
▶ Seg
Parameter Setting Default
TemperatureSV TemperatureEU(0 ~ 100) [℃] EU(0)
HumiditySV HumidityEU(0 ~ 100) [%] EU(0)
Time
0 ~ 9999 [H] 0
0 ~ 59 [M] 0
Waiting Release Cancel, set 0
[Segment parameters]
①
②
③
④
No. Description
1 Set the temperature settings (value) of the segment.
2 Set the humidity settings (value) of the segment
3 Set the operation time of the segment
4 Select the standby feature in “standby/start pattern management”
Fig. 47) segment setting
هﺮﮐ ﮓﻧﺎﯿﻧﺎﻫ تﻻﻮﺼﺤﻣ یرﺎﺼﺤﻧا هﺪﻨﯾﺎ ناﻮﯿﺳ ﺖﮐﴍ
To Next Page
Loading...
Need help?
General
