19
INFORMATION
The negative pressure unit signals when the battery charge is low� A warning message appears on the
touchscreen (see chapter Warning messages)�
If the battery is too low, the negative pressure unit switches off automatically�
Hanger bar
Attaching the negative pressure unit using the hanger bar
VivanoTecPro can be easily attached using the hanger bar� For example, to
bed rods or tables�
Attaching the hanger bar
> First insert the hanger bar into the hollow on one side, then insert the
second end (while applying a little tension) into the second hollow�
Shoulder strap
1 Strap clip for attachment to the hanger bar (long)
2 Strap clip for attachment to the hanger bar (long)
3 Strap clip for attachment to the hanger bar (short)
4 Loop for attachment to the bed
Shoulder strap
> Attach the strap clip
to the side of the hanger bar�
> Attach the strap clip
to the other side of the hanger bar�
IFU_4095080_0302884_190824_EN.indd 19IFU_4095080_0302884_190824_EN.indd 19 19.08.24 12:3119.08.24 12:31