Exposure Modes
MANUAL EXPOSURE MODE
To change the Exposure mode Swipe Down to display the
Control Screen.
Manual mode provides total user control of the shutter and
aperture settings. In this mode the shutter speed and aperture
settings are manually chosen by turning the front and rear scroll
wheels.
The standard exposure setting is obtained when the pointer over
the exposure scale is positioned above the central index (in the
viewnder display).
Any deviation from this standard setting is displayed by:
● The pointer appearing elsewhere than above the central
index
● Figures above the scale representing the amount of
adjustment in EV's.
A ‘+ 0.7’ above the scale in the display, would indicate a ‘0.7
EV overexposure’ setting. Conversely, a ‘-2’, for example,
would indicate a ‘2EV underexposure’ setting. Note that the
appearance of a +/- symbol on the grip and viewnder displays
in manual mode means that a change has been made to the
exposure compensation setting. See later section on Exposure
compensation.
The actual aperture settings and shutter speeds are indicated
to the right of the exposure scale in the conventional manner.
Note!
Full-stops, half-stops and third-stops are also displayed,
according to setting (see increment setting). For example, a
setting between f/8 and f/11 will appear as f/9,5 if half-stop is
chosen.
X1D www.hasselblad.com
USER GUIDE
35
Functions
To Next Page
Loading...
Need help?
General
Weight and Dimensions
