BATTERY CHARGER
The battery charger BCX-1 (3053573) is supplied with a number
of plug attachments to suit various types of domestic electrical
sockets available worldwide. Other types of sockets will require
a domestic socket converter.
Attach the appropriate plug by sliding it into position as in the
illustration to the right. Reverse the procedure to remove the
plug.
CHARGE THE BATTERY
With the battery (3054752) removed from the camera, insert
the jack plug from the battery charger into the socket on the
battery (1). Insert the battery charger into a standard (100–
240V~ /50–60 Hz) domestic socket.
During the charging procedure, the lamp on the charger signies
the following:
Steady Green light: Standby (no battery connected).
Steady Yellow light: Charging.
Steady Green light: Ready.
Note!
It can take about 6 hours to charge the battery completely up to
100% the rst time.
Note!
You can still charge the battery when the protective cover is
attached by lifting the lid.
See next page for more details and precautions.
1
X1D www.hasselblad.com
USER GUIDE
80
Functions
To Next Page
Loading...
