Hasselblad X1D - Error Messages

X1D www.hasselblad.com
USER GUIDE
120
Troubleshooting
6.1 ERROR MESSAGES
Caution!
Be careful when you attach/remove the
components to/from the camera. This will help
prevent damage to the data bus connections.
If any error message is displayed
1 Remove the components from the camera.
2 Attach the components to the camera again.
If the error message is still displayed
1 Remove the battery.
2 Wait 10 seconds.
3 Attach the battery again.
The Camera processor is now reset.
If the error message is still displayed
1 Write down the error message.
2 Contact your closest authorized Hasselblad
dealer.