Wheel Alignment AXIS500
AXIS500 Manual Instructions
1 General safety precautions
1.1 Operator’s responsibility
Laser Aligner AXIS500 has been designed and
manufactured in accordance with harmonized standards. It
is thus state of art and provides maximum security during
operation.
Structural changes of Laser Aligner require written approval
of manufacturer!
Operational safety can only be achieved, if all required
measures are carried out. It is due to the responsibility of
the operator to consider these measures and to control their
implementation.
In particular the operator has to ensure that
• the device is only used appropriately to its agreed
functionality
• the device is only used if proper functionality is provided
• complete operating instructions are provided in legible
form at point of location of device
• only suitably trained and authorized personnel operates
the device
• the personnel is regularly instructed in all aspects of
operational safety and familiar with operating
instructions and contained safety precautions
• all warning and safety precaution labels maintain
attached to the device in legible form
1.2 Description of applied symbols
These operating instructions con
tain accurate safety precautions, following symbols
have been applied for indication
This symbol indicates general risk for the device and
materials.
Warning of hazardous electric voltage
This symbol indicates risks for humans, device and
materials.
To Next Page
Loading...