C-5Commissioning Ý Installing modules
Spider8
6. When you have installed all the required modules in this way,
close the cover and fasten it again with the screws.
7
. Fit the caps to the top of the housing.
8. Connect your PC to the Spider8 (see Chapter D ”Connecting a
PC”).
9. Connect your transducer to the specially provided sockets on the
back of the Spider8 (see Chapter D ”Connecting transducers”).
If you are using a cable you have made up yourself, please note
the pin assignment for your transducers in Chapter D
”Connecting a transducer”.
To Next Page
Loading...
