6
Spider8
Residual dangers
The performance and list of components supplied with the Spider8
cover only part of the scope of measurement technology. In addition,
equipment planners, installers and operators should plan, implement
and respond to the safety engineering considerations of
measurement technology in such a way as to minimise residual
dangers. Existing regulations on the subject must be observed.
Reference must be made to residual dangers connected with
measurement technology.
If there is any risk of residual dangers when working with the
Spider8, it is pointed out in this introduction by means of the
following symbols:
Symbol:
DANGER
Meaning: Maximum danger level
Warns of a decidedly dangerous situation in which failure to comply
with safety requirements will lead to death or serious physical injury.
Symbol:
WARNING
Meaning: Dangerous situation
Warns of a dangerous situation in which failure to comply with safety
requirements can lead to death or serious physical injury.
To Next Page
Loading...
