E-15
Configuring the Spider8 with the Setup program Ý Description of the setup dialogue
Spider8
Buttons:
A button is a rectangular graphic element with a three-dimensional
appearance. A button is activated by selecting it with the
mouse-button. In the case of a button, the action is not executed
until you release the selection button on the mouse whilst the
pointer is still on the screen button.
Example: Zero balance
Zero balance
By clicking on the Zero balance button, all channels which are
selected in the ”Tare” column are zeroed. In the case of buttons
which have three dots after the label, a new dialogue appears (e.g.
Test Device...).
To Next Page
Loading...
