CDM 3201 Order No. BA 92-12-3321A Issue 19.09.08 43
5.7.1 Welding in Automatic Mode
In automatic mode the welding gun PAH-1 or the welding head KAH 412 can be used
for welding elements from dia 3 to 8 mm.
You can manually insert the welding elements into the welding gun (semi-automatically)
or you can work with a fully automatic stud feeding unit.
You can order the fully automatic stud feeding unit under the following order number:
Stud diameter Order number
VBZ-3 Ø 3 94-66-103 B
Ø 4 94-66-104 B
Ø 5 94-66-105 B
Ø 5 x-mas tree stud 94-66-153 B
Ø 6 94-66-106 B
Ø 6 x-mas tree stud 94-66-163 B
Ø 7,1 94-66-171 B
Ø 8 94-66-108 B
other Ø on request
Put the air connections of the welding gun into the related air outlet sleeves at
the front of the power unit. Note the color marking:
black = controlled air (during stud feeding time)
blue = continuous air for pushing through the stud into the
chuck and working as a stop.
The power unit controls the air between these two sleeves.
With false connections, feeding and welding problems may
occur.
5 Stud Welding Procedure
5.7 Welding Procedure
To Next Page
Loading...
