HBS CDM 3201 - 6 Switching off the Power Unit; Temporary Switching off; Disposal

54 CDM 3201 Order No. BA 92-12-3321A Issue 19.09.08
6 Switching off the Power Unit
This chapter describes what you should observe when you switch off the power unit
temporarily or completely.
6.1 Temporary Switching off
 Switch off the power unit.
 Unplug the control cable and the welding cable from the power unit.
 Protect the power unit against ingress of fluids and foreign bodies.
6.2 Disposal
If you shut down the installation, you can return the complete power unit to HBS (for
address see page ii).
We will take care of environmentally correct material separation and disposal.
6 Switching off the Power Unit
6.1 Temporary Switching off