HBS CDM 3201 - Page 89

CDM 3201 Order No. BA 92-12-3321A Issue 19.09.08 89
glossary .............................................. 80
gloves .................................................... 9
ground cable ..................................19, 56
ground clamps ..................................... 19
ground connection ............................... 19
guarantee claims .................... 12, 25, 84
guarantee clauses ............................... 84
guide ................................................... 10
H
headgear, protective ............................. 24
heat built-up ........................................ 16
hollow parts, welding on ...................... 24
hyper terminal ...............................45, 74
I
intended use ........................................ 12
internal thread sleeve ........................... 52
ISO-clip ............................................... 53
ISO-clip, plastic coated ....................... 53
ISO-nail ............................................... 53
IT, pin with internal thread ....... 29, 52, 83
K
keyboard ............................................. 22
L
language ............................................. 39
LCD display ......................................... 31
liability, any ............................ 12, 25, 84
library mode ........................................ 34
lift (see manual welding gun,
welding head) ............................... 27
lift test (welding gun) ............................ 39
liquid spatters ...................................... 42
liquids, combustible ............................. 16
lot ........................................................ 52
M
magnetic fields .............................. 16, 25
mains fuse ........................................... 30
mains switch ....................................... 30
maintenance ................................... 9, 55
maintenance instruction ........................ 9
maintenance instruction
for your company ............................. 9
malfunction ............................................ 9
malfunctions and corrective actions ..... 50
markings ............................................. 14
material combinations ...................29, 83
material of the welding element ........... 28
material of the workpiece ..................... 28
material separation,
environmentally correct ................. 54
materials, rapidly oxidizing .................. 26
metal spatters ..................................... 24
modes ................................................. 33
N
non-combustible clothes ...................... 24
O
operating manual ............................ 9, 15
operating manual, storage of ................. 9
operation, improper .............................. 42
operators ............................................... 9
order number ....................................... 59
P
pace maker ............................ 11, 17, 25
packaging ............................................ 13
PAF (process sequence control) .......... 35
PAF value ............................................ 35
personal injury ......................................11
personnel, properly instructed, qualified ... 9
personnel, qualified ................................ 9
pin UT ................................................. 52
pin with internal thread IT ..................... 52
pipes, welding to ................................. 28
place of operation ................................ 12
plunging speed .............................. 26, 27
power supply ....................................... 17
power unit ............................................ 80
power unit, switching on ...................... 30
prestress at installation .................29, 83
process sequence control (PAF) .......... 35
production ............................................. 9
program mode ..................................... 33
protective apron ................................... 24
protective equipment ...................... 17, 25
protective equipment, personal .............. 9
protective gloves .................................. 24
protective goggles .................................. 9
PT, threaded stud ................... 29, 52, 83
punched plates, welding to .................. 28
Index