59
(4.20.3) Bluetooth
HeadRush Core features an integrated Bluetooth audio
receiver, enabling you to connect a mobile device and play
along with songs, lesson apps, etc. The settings for this feature
are located on this tab.
To enable the Bluetooth audio receiver for pairing to your
mobile device, tap the ON button at the top of the screen.
Then, search for “HeadRush Core” in the Bluetooth Settings
menu on your device and connect to it.
To configure which outputs the Bluetooth audio is sent
to, use the Bluetooth Out parameter and choose XLR to
send the signal to HeadRush Core’s XLR outputs, 1/4” to
send the signal to the 1/4” outputs, and Phones to send
the signal to the 1/8” headphones output.
To disconnect a paired Bluetooth Audio device, tap the
disconnect button next to the name of the device under
the list of connected devices.
To disable the Bluetooth audio receiver, tap the OFF button.
To have HeadRush Core forget a previously connected
device, tap the device’s name, and then tap Forget Device.
(4.20.4) Wi-Fi
HeadRush Core also features an integrated Wi-Fi connection,
enabling you to connect your HeadRush Core to a local
network so that you can receive new firmware updates, use
the HeadRush Cloud to download/share new rigs and clones,
or access files from a Dropbox storage account when using the
File Browser.
To connect HeadRush Prime to your local Wi-Fi network,
tap the ON button at the top of the screen. Then, tap the
local network that you would like to connect to, and enter
the password for the network when prompted.
While you are connected to a Wi-Fi network, you can tap
the settings icon located next to the network name to view
the Wi-Fi signal strength, security, and IP details, as well as
access settings for auto-connect, and forgetting a local
network.
To disconnect HeadRush Core from your local network
and disable Wi-Fi, tap the OFF button.
HeadRush Remote: When HeadRush Core is connected to Wi-
Fi, set this to On to enable access to the Web UI editor. Once
enabled, open a web browser and enter the IP address shown
here or headrushcore.local. You can use this interface to edit
and save rigs and setlists as well as adjust global settings. See
(4.23) Remote Edtior Web UI for more information.
To Next Page
Loading...
