Graphic simulation | Views
7
542
HEIDENHAIN | MANUALplus 620 | User's Manual | 12/2017
Rotating the 3-D view with the menu functions
With the menu functions you rotate the graphic around the
depicted axes. The perspective view soft key resets the graphic to
its initial condition.
3-D view soft keys
Display the finished part and the
programmed workpiece blank
Display the finished part and the updated
workpiece blank
Activate/deactivate the check mode
Display a section view
Select the side view
Rotate the side view by 90°
Select the perspective view
Menu for the 3-D view
Tilt the graphic backward
Rotate the graphic horizontally in the indicat-
ed direction
Rotate the graphic horizontally in the indicat-
ed direction
Rotate the graphic counterclockwise
Tilt the graphic forward
Rotate the graphic clockwise
To Next Page
Loading...
