Graphic simulation | Views
7
HEIDENHAIN | MANUALplus 620 | User's Manual | 12/2017
543
Rotating and moving the 3-D view with the mouse
With the right mouse button pressed you can move the displayed
workpiece as required.
When you press and hold the left mouse button, you can do the
following:
Vertical movement in the simulation window: Tilt the workpiece
forward or backward
Horizontal movement in the simulation window: Rotate the
workpiece horizontally around its own axis
Horizontal or vertical movement at the edge of the simulation
window (gray border): Rotate the workpiece clockwise or
counterclockwise
Movement in any direction: Rotate the workpiece in any
direction
To Next Page
Loading...
