Organization mode of operation | Parameters
9
HEIDENHAIN | MANUALplus 620 | User's Manual | 12/2017
623
Settings for fixed cycles and units
Safety clearance in infeed direction [SMZ] (602805)
[mm]: Distance between the starting position and the upper edge of the milled
object
Safety clearance in milling direction [SME] (602806)
[mm]: Distance between the milling contour and the edge of the milling cutter
Oversize in milling direction [MEA] (602807)
[mm]: Oversize
Oversize in infeed direction [MZA] (602808)
[mm]: Oversize
Processing
ExpertPrograms
Expert programs (606800)
Parameter list
Key in parameter list
Parameter lists for expert programs (606900)
Name of the expert program
Name of the expert program without path
Parameter
Parameter value
Processing
ProgramUnits
Define units (607000)
Template list
Descriptions of the most important machining parameters
(Processing)
Machining parameters are used by the AWG working
plan generation feature (TURN PLUS mode of operation)
and various machining cycles.
To Next Page
Loading...
