Organization mode of operation | Parameters
9
HEIDENHAIN | MANUALplus 620 | User's Manual | 12/2017
643
Milling
Milling – Oversizes
Oversizes
Parameter
Oversize in milling direction MEA
Oversize in infeed direction MZA
Milling – Approach and departure
Approach and departure movements are at rapid traverse (G0).
Approach and departure
Parameter
Approach – Face ANMS
Approach – Lateral surface ANMM
Departure – Face ABMS
Departure – Lateral surface ABMM
Approach or departure strategy:
1: Move simultaneously in X and Z directions
2: First X, then Z direction
3: First Z, then X direction
Milling – Safety clearances
Safety clearances
Parameter Meaning
Safety clearance in infeed direc-
tion SMZ
Distance between starting
position and top edge of object
to be milled
Safety clearance in milling direc-
tion SME
Distance between milling
contour and side of mill
To Next Page
Loading...
