4. Install a new bulb in the reverse order
of removal.
68
Rear Turn Signal Bulb
1. Insert hand from body cover rear side,
above rear fender area and remove turn
signal bulb holder (1) by turning
counterclockwise.
(1) Bulb holder
1
2. Remove the bulb (2) from bulb holder
by pressing in and turning counter
clockwise.
3. Install a new bulb in the reverse order
of removal.
(1) Bulb holder (2) Bulb
1
2
3. Remove the bulb (2) from the holder
by pressing in and turning counter
clockwise.
(1) Bulb holder (2) Bulb
1
2