28
Help assure your vehicle's future reliability and
performance by paying extra attention to how
you ride during the first 500 km.
Running in
During this period, avoid full-throttle starts
and rapid acceleration.
NOTE
•
Do not open the throttle during starting the
vehicle.
•
To start the engine if any gear is engaged,
press the clutch lever and press the integrated
start-kill switch.
WARNING
!!
Never run the engine in a closed area, the
exhaust contains poisonous gases.
CAUTION
!!
Do not shift gears without operation of clutch
and without closing the throttle otherwise this
would lead to damage of gears.
5
4
1
N
2
3
•
When the vehicle attains a moderate speed,
close the throttle, press the clutch lever and
nd
shift to 2 gear by placing the toe on the
underside of gear pedal and lift upwards.
RIDING
•
After the engine has been warmed up, the
vehicle is ready for riding.
•
While the engine is idling, press the clutch
lever and depress the gearshift pedal
st
downwards using the toe to shift into 1
gear.
•
Slowly release the clutch lever and at the
same time, gradually increase engine speed
by opening the throttle. Coordination of the
throttle and clutch lever will assure a smooth
positive start.
•
This sequence is repeated progressively to
rd
th
th
shift to 3 , 4 and 5 gear.
Anti-lock braking system (ABS)
BRAKING
ABS is designed to meet two essential
requirements during every brake application:
•
To help maintain steering control and
manoeuvrability–on road surfaces.
•
The ABS computer acts on the basis of the
comparative speeds of the front wheel. The
use of non-approved tyres can affect the
speed of the wheels and supply incorrect
information to the ABS computer.
The ABS system is self-regulating and
always active once vehicle speed exceeds
5 km/h.
•
To help provide vehicle stability.
This model is equipped with Anti-lock braking
system (ABS). ABS enhances active safety by
helping to prevent the wheels from locking
under braking.
To Next Page
Loading...
